Table of Contents
Advertisement
Crib (8501)
- Assembly and Operation Manual
Congratulations on purchasing a MDB Family product. This crib will provide many years of service if you
adhere to the following guidelines for assembly, maintenance, and operation. This crib is for residential
use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assem-
bling the crib in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers.
All of our cribs are made from natural woods. Please understand that natural woods have color variations
which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-
WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC
VARIATIONS.
* This crib can later be converted into a toddler bed or a full-size bed. To convert
to a toddler bed, turn to page 8. To convert to a full-size bed, turn to page 9.
page 1
Revised 18MAY2011
Advertisement
Table of Contents
Related Manuals for MDB Crib (8501)
Summary of Contents for MDB Crib (8501)
- Page 1 Crib (8501) - Assembly and Operation Manual Congratulations on purchasing a MDB Family product. This crib will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only. Any institutional use is strictly prohibited.
- Page 2 CRIB PARTS B. Stationary Side A. Headboard Side F. Front E. Front Right Leg Left Leg C. Left End Panel D. Right End Panel G. Spring Frame P. Cross Bar (2) Tools Needed (not included) Q. Guard rail Phillips screwdriver N.
- Page 3 HARDWARE H1. 3” Round Head Bolts with Nuts (4) H2. 2-1/4” Allen Head Bolts (12) H4. 1-3/4” Allen Head Bolts (4) H5. 3/4” Allen Head Bolts (4) H3. 2” Round Head Bolts (4) H8. Wood H6. 1-3/4” Phillips Head Screws (4) H7.
- Page 4 STEP 2. Assemble the end panels (C & D), front legs (E & F) and rear legs (N & O). DO NOT OVERTIGHTEN. STEP 3. 3a.) Slide the cross bar (P) into the headboard side (A). Step 4a.) 3b.) Attach the headboard side (A) to side panels.
- Page 5 STEP 4. Attach the spring frame (G) to legs. Swing out four hangers at corner of the spring frame (G) carefully. Attach spring frame FLAT SIDE UP. Choose the height of the spring frame. Start at the highest level and adjust accordingly. Bolt the spring frame (G) to legs using Allen head bolts (H5), washers (H7), lock washers (H11) and Allen wrench (H10).
- Page 6 STEP 6. Ready to use. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. Be sure to tighten the cross bar screws now that you have installed to the stationary side. Recheck all screws and bolts to be sure they are fastened securely. Before placing your mattress in the crib, you can make your own mattress protector by cutting the cardboard packing insert to 27”...
- Page 7 Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. DO NOT substitute parts. Contact MDB FAMILY for replacement parts and instructional literature if needed. • DO NOT use a water mattress with this crib.
- Page 8 Crib (8501) Toddler Bed Conversion Assembly Instructions * All of the parts and hardware you will need are supplied with the crib at the time of purchase. STEP 1. Unscrew the Allen head bolts and lock washers and remove the front panel assembly.
- Page 9 * For all 4 in 1 cribs, please contact a retailer to order your full size adult wooden bed rails for your full size bed conversion. Congratulations on purchasing a MDB Family product. This product will provide many years of service if you adhere to the following guidelines for assembly, maintenance and operation. This product is for residential use only.
Need help?
Do you have a question about the Crib (8501) and is the answer not in the manual?
Questions and answers