Nmea 2000 Alarms - Lowrance GlobalMap 4800M Product Support Bulletin

To Reset Calibration:
Choosing the Reset Calibration command will switch fuel flow calibra-
tion settings back to factory defaults.
1. Press
MENU
2. Highlight
menu will appear.
3. Highlight to
the engine attached to the desired fuel flow — and press
4. Highlight
R
tion message will appear: Are you sure you wish to Reset Calibration?
Select and press
Y
ES
been returned to factory defaults.
To Reset Trip:
The Reset Trip function allows you to reset to zero the running total of
fuel used on a particular trip.
1. Press
MENU
2. Highlight
menu will appear.
3. Select
R
ESET
will appear: Are you sure you wish to Reset Trip? Highlight
press . The Trip Fuel Used figure has been reset to zero.
ENT
To Reset Seasonal:
Your unit can track fuel usage not only for trips, but also for entire sea-
sons. The reset seasonal command allows you to reset to zero the run-
ning total of fuel used during a season.
1. 1. Press
MENU
2. Highlight
menu will appear.
3. Select
R
ESET
sage will appear: Are you sure you wish to Reset Seasonal?
Highlight
Y
ES
reset to zero.

NMEA 2000 Alarms

The NMEA 2000 Alarms menu allows you to set Full and Empty fuel
alarms for the EP-10 Fuel Flow, EP-15 Fluid Level, EP-50 Storage De-
vice and the Suzuki Engine Interface. The alarms may be set to a per-
centage (0-100%) of tank capacity.
| , select
MENU
F M
UEL ANAGEMENT
E S
NGINE ELECT
C
ESET ALIBRATION
. Calibration settings for the selected fuel have
ENT
| , select
MENU
F M
UEL ANAGEMENT
and press
T
RIP
| , select
MENU
F M
UEL ANAGEMENT
and press
S
EASONAL
and press
ENT
and press
NMEA 2000
and press
and press
ENT
and press
ENT
and press
NMEA 2000
and press
. The following confirmation message
ENT
and press
NMEA 2000
and press
. The following confirmation mes-
ENT
. The Seasonal Fuel Used figure has been
16
.
ENT
. The Fuel Management
ENT
. Select the desired engine —
. The following confirma-
.
ENT
. The Fuel Management
ENT
ENT
. The Fuel Management
ENT
.
ENT
and
Y
ES
.