Unlocking A Combination Memory - Rodgers Masterpiece Owner's Manual

Unlocking a Combination Memory

● On instruments with memory level pistons M1, M2, etc., any memory level can be
locked using the following procedure:
1. Press and hold the memory piston (M1, M2, M3, etc.) corresponding to the
memory level you want to lock until the Memory Bank screen appears. Internal
or Memory Card and (#) Unlocked or (#) Locked appears in the display.
2. If (#) Locked appears, go to step 3. If (#) Unlocked appears, the memory level is
already unlocked.
3. Turn the Select knob to highlight Locked.
4. Rotate the Alpha Dial to select Unlocked. The memory is now unlocked and that
piston can be changed.
● On instruments with the M+ and M- pistons, memory level may be unlocked using the
one of the following procedures:
1. Use M+ or M- pistons to select the memory level to be unlocked.
2. Press and hold SET then press and release M+.
3. Turn the Select knob to highlight Locked.
4. Rotate the Alpha Dial to highlight Unlocked.
OR, depending on model:
1. Use M+ or M- pistons to select the memory level to be locked.
2. Press and release the QUICK MENU piston. Use the Select knob next to the
display to scroll down until Console appears in the display.
3. Press the QUICK MENU piston. Use the Select knob to scroll down until
MemoryLevel Lock appears in the display.
4. Press the QUICK MENU piston.
5. Turn the Alpha Dial until Unlocked appears in the display.
6. Press the STOP piston (located under the Choir manual to the right) three times
to exit this mode.
23