Connector Types - Basler L400k User Manual

Camera Interface
Connector Pin Numbering
Figure 2-2 shows the pin numbering for the connectors on the back of the camera.
Figure 2-2: Pin Numbering

2.1.3 Connector Types

26-Pin Connector
The 26-pin connector on the camera is a female 0.050 inch MDR connector as called for in the
Camera Link Specification.
6-Pin Connector
The 6-pin connector on the camera is a Hirose micro-miniature locking receptacle (part # HR10A-
7R-6PB) or the equivalent. The recommended mating connector is the Hirose micro-miniature
locking plug (part # HR10A-7P-6S). A plug of this type will be shipped with each camera. The plug
should be used to terminate the cable on the power supply for the camera.
2-4
Draft
BASLER L400
k