Figure 2-2: A600
The camera housing is connected to the cable shields and coupled to signal ground
through an RC network (see Figure 2-3 for more details).
2.1.3 Connector Types
The 6-pin connector on the camera is a standard IEEE-1394 socket.
The 10-pin connector on the camera is an RJ-45 jack.
!
BASLER A600
f
DRAFT
10
1
Pin Numbering
f
Caution!
The plug on the cable that you attach to the camera's RJ-45 jack must
have 10 pins. Use of a smaller plug, such as one with 8 pins or 4 pins, can
damage the pins in the RJ-45 jack on the camera.
6
5
4
3
2
1
Camera Interface
2-3