Gentle Action; Suds Cooling; Code - Miele W 5873 WPS Operating Instructions Manual

Settings

Gentle action

Activating Gentle action reduces the
drum action and is suitable for
washing slightly soiled items more
gently.
Gentle action can be activated for the
Cottons and the Minimum iron
programmes.
The washing machine is delivered with
the Gentle action setting deactivated.

Suds cooling

When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Suds cooling takes place when
temperatures of 90? and 75°C are
selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The machine is delivered with Suds
cooling deactivated.
80

Code

The code prevents your machine
being used without your knowledge.
To activate the code
^ Select "Activate" and confirm with the
Temperature (OK) button.
The display will now request that a
code is entered. The code is 125 and
cannot be altered.
^ Press the Spin speed button (W) or
Delay start (V) until the first number
appears in the display.
^ Confirm your selection of the number
by pressing the Temperature (OK)
button.
^ Repeat the process until all three
numbers have been entered.
^ Press the Temperature (OK) button.
Using the washing machine when the
code is activated
When the machine is switched on
again, the display will request the lock
code.
^ Enter code 125 as described above
and confirm the entry.
The washing machine is now unlocked
and ready for use.
To deactivate the code
Proceed as for activating the lock code.