Advertisement
USING YOUR APPLIANCE
CHARGING BATTERY
For best results, fully charge the unit before first use. Connect the USB cable
(included) to the charging port of the speaker and insert the other end into a
USB port on your computer or other suitable USB outlet.
The LED indicator will turn on, indicating that the battery is charging. It will
take 3-4 hours for the battery to fully charge.
LED INDICATOR
There is an LED light located in the middle of the front speaker.
• LED Off - Power OFF
• Flashing BLUE - Power ON
• Flashing BLUE/RED - Pairing mode (searching Bluetooth devices)
• RED (While in use) - Low Battery Level
• BLUE - Battery almost drained
• RED (While Charging) - Battery is recharging
TURN THE SPEAKER TO BLUETOOTH PAIRING MODE
1. Turn the main power switch on the back of Bluetooth XL Sound Box to
"ON" position.
2. Wait 2~3 seconds until the LED indicator starts blinking red and blue. This
indicates that it is in pairing mode.
3. If the unit doesn't get into "Pairing" mode by itself, press the "Play /
Pause / Answer / Hang Up" button, for 2-3 seconds. This will put the unit
in "Pairing" mode.
NOTE: Bluetooth XL Sound Box will stay in "Pairing" mode for 1 minute. If
the source device (like cell phones, tablets, MP3 players etc.) are not synced
to the unit within 1 minute, simply turn the unit "OFF" and then turn it back
"ON", and repeat step 2 or 3.
4
TOMORROWS TECHNOLOGY TODAY
A58013.indd 4-5
USING YOUR APPLIANCE
PAIRING YOUR DEVICE WITH SOUND BOX
Your Bluetooth XL Sound Box can wirelessly stream audio from any
Bluetooth enabled device within 33 Feet. Simply follow the below steps.
1. Turn on the Bluetooth on your Mobile Phone or Tablet or Computer
etc.
2. It will search for various devices
3. Bluetooth XL SOUND BOX will show up as "SPEAKER"
4. Select "SPEAKER"
5. Once paired, the LED light will turn to BLUE Color.
6. ANSWERING CALLS While Connected Through Bluetooth Technology.
When you receive an incoming call, Bluetooth XL Sound Box will make
an alerting sound. If you are listening to music from your phone, the
music will automatically pause.
THERE ARE 2 WAYS TO ANSWER A CALL:
1. As you usually do, using your phone
2. Press the "Play / Pause / Answer / Hang Up" button located at the top
of the unit. •Speak normally, into the unit (as unit has a microphone
built-in).
Note: Answering calls will only function while the unit is connected
through Bluetooth technology.
OTHER CONTROLS (When Connected Through Bluetooth Technology)
• Volume Increase: Press and hold the "Increase Volume / Skip-
Forward" button to increase the volume.
• Volume Decrease: Press and hold the "Decrease Volume / Skip-
Backward" button to decrease volume.
• Skip Forward Track: Press the "Volume Increase/Skip-Forward"
button once to skip a track forward.
• Skip Backward Track: Press the "Volume Decrease/Skip-Backward"
button once to skip a track backward.
• Pause – Press the "Play / Pause / Answer / Hang Up" button once to
pause the music. Press again once to resume the music.
• Answer Call – Press "Play / Pause / Answer / Hang Up" button once to
5
TOMORROWS TECHNOLOGY TODAY
28/05/2013 16:33
Advertisement
