scala rider PACKTALK User Manual page 14

CALLING INTERCOM CHANNELS "A" AND "B"
OPTION 1: Voice Connect (VOX)
Say any word loudly into the microphone. When you hear the Voice Command tone,
say "Call Intercom" to start an intercom call with "A" and/or "B" (subject to who is
present).
VOX Intercom calls with only "A" or "B" will end automatically after 30 seconds of
silence.
g
OPTION 2: Via the Cardo SmartSet App (see 3.2)
☛
OPTION 3: Manual Mode
Use this to start an Intercom call with either:
• Channel "A": Tap
• Channel "B": Double tap
To end a call with either Channel "A" or "B" - tap
To end a conference call with both "A" and "B" - Press
If you are already in an Intercom call with "A" or "B", you can add another rider
("A" or "B") by double-tapping
THREE-WAY INTERCOM
Pairing
Rider "1" is paired to Rider "2" and also to Rider "3".
1. Rider 1 pairs to Rider 2 using Channel "A"
2. Rider 1 pairs to Rider 3 using Channel "B"
In this configuration, Rider 1 is using two Bluetooth connections:
IMPORTANT: Conference Mode Considerations
During a 3 or 4-Way Intercom Conference call, riders using both intercom channels "A" and "B" will
not be able to receive phone calls or GPS instructions as long as the call is in progress.
|
14
v
v
.
v
Rider 2
Rider 1
v
.
v for 2 seconds
Rider 3