scala rider PACKTALK User Manual page 12

"1+8" INTERCOM TOGGLING
5.2a
(with PACKTALK, G9 / G9X and cardo SHO-1)
Pair with up to 8 other devices ("1+8" Buddies) and connect with them one at a time by
saying their name.
CONFIGURE YOUR BUDDY NAME
Before using "1+8" Intercom, you should assign yourself a Buddy name, so that other
paired Buddies can call you by this name. Visit the Cardo Community to configure your
Buddy Name (see Section 3).
Until you configure a Buddy name, your unit will be known as "PACKTALK".
If you change your Buddy name, you must pair again with your "1+8" Buddies for their
devices to receive the new name.
Hear Your
In Standby, press
Buddy Name
Buddy name through the speakers.
Check Your
Check via the Cardo SmartSet and Cardo Community. You can also hear your
Buddy List Buddy List through the speakers: In Standby, press
PAIRING "1+8" BUDDIES
There are three ways to pair with "1+8" Buddies:
OPTION 1: Via the Cardo Community® (see 3.1)
g
OPTION 2: Via the Cardo SmartSet App (see 3.2)
☛
OPTION
1. In Standby, press
2. Enter "1+8" Pairing mode on the second unit.
3. A purple LED for 2 seconds indicates pairing was successful.
If your scala rider already has a full list of 8 paired "1+8" Buddies, pairing another buddy will
replace the buddy that you have not spoken to for the longest time.
CALLING "1+8" BUDDIES
There are three ways to start an intercom call with "1+8" buddies.
OPTION 1: Voice Command (VOX)
Say any word loudly into the microphone. When you hear the Voice Command tone,
say the name of a "1+8" Buddy i.e. "John Smith". VOX Operation settings must be set
to "Voice Command" (see section 3).
☛
OPTION 2: Manual Mode
SAY THE NAME
Z
Tap and say
the Buddy name
g
OPTION 3: Via the Cardo SmartSet App (see 3.2)
|
12
Z
and v simultaneously for 2 seconds. You will hear your
3: Manual "1+8" Pairing
for 5 seconds to enter "1+8" Pairing mode.
Z
CHOOSE THE NAME (from your Buddy List):
In Standby, press
When you hear the name of the Buddy you wish to call, tap
Z
or say any word loudly into the microphone.
To cancel Buddy List playback: Press
Z
Z
for 2 seconds to hear your Buddy List.
Z
for 2 seconds
for 2 seconds.