Dmc Intercom Mode - scala rider PACKTALK User Manual

5.1 DMC INTERCOM MODE

The default intercom mode is Bluetooth Intercom. To switch to DMC intercom mode:
• Enter the Standby Feature menu and choose 'Switch Intercom mode'
• Use the Voice Command (see section 4.4)
• Use the Cardo SmartSet App (see section 3.2)
Introduction
The scala rider PACKTALK uses DMC technology to create a spontaneous and fluid virtual
network of riders. DMC enables simultaneous connectivity among a far greater number
of riders than the Bluetooth intercom mode.
How DMC technology works
In DMC intercom mode, each rider acts as an autonomous hub that maintains
simultaneous and independent communication links with each of the other members in
the pack, operating in a mesh network of PACKTALK users.
PACKTALK users may join, leave and rejoin the pack conversation without compromising
the integrity of the ongoing multi-point conference call among the other pack members.
Whenever a PACKTALK user cannot directly connect with pack members beyond his
intercom reach, it will re-adjust within split seconds and re-connect to the most suitable
other pack member in order to 'leapfrog' to the remote PACKTALK user.
Create a new pack and add members to the pack
In DMC mode, press
flashing, tap v to define yourself as the "Pack Creator". Your unit will then proceed to
search for pack members in DMC intercom pairing mode and automatically add them to
your pack. If no units are found within 2 minutes, your unit will return to Standby mode.
The process can also be done from the Advanced Features Menu in Standby mode and
via the Cardo SmartSet App.
Join an existing pack
Make sure your unit is in DMC intercom mode and that you are within 3 meters /10 ft. from
the Pack Creator. While the Pack Creator is in DMC Pairing mode, press
your unit. The LED will flash Purple to indicate that pairing with the Pack Creator has been
successful. The process can also be done from the Advanced Features Menu in Standby
mode and via the Cardo SmartSet App.
Using DMC intercom
Up to 10 riders can participate in a pack, with all pack members able to speak and hear
everyone else. To avoid confusion, only 4 members can be heard at the same time.
To start talking to other members of the pack, tap
Mute the pack
If for any reason you would like to mute the conversation but still remain a pack member,
double-tap . Tap
v
Leaving a pack
If your connection is lost for any reason, you will remain a member of the pack until your
PACKTALK unit can reconnect to any of the other members of the pack.
If you choose to leave the pack you can:
• Join a new pack
• Choose 'Leave the Pack' in the Advanced Features Menu in Standby mode
• Use the Cardo SmartSet App.
|
10
for 5 seconds to enter intercom pairing mode. While the LED is
v
again to rejoin the conversation.
v
v
or use the VOX.
v
for 5 seconds on