Miele TMV 840 WP Operating Instructions Manual page 84

Installation and connection
 Turn the door lock through 180°.
 Press the door lock into openings 
on the opposite side of the door
opening.
 Adjust the position of the door lock
so that the screw holes line up with
those in the front panel of the dryer
.
 Secure the door lock with the two
Torx screws.
84
3. Remove the lock catch from the
door
 First take the rubber seal off the door
and place this to one side.
 Use a T20 Torx screwdriver to re‐
move screw  on the lock catch.
 Pull off the lock catch together with
lock catch cover .