Miele TMV 840 WP Operating Instructions Manual page 82

Installation and connection
1. Adapter
2. Nut
3. Hose clip
4. End of the hose (secured with the
hose holder)
5. Non-return valve
6. Tumble dryer drain hose
82
 Fit adapter 1 to the sink drain outlet
using nut 2.
The nut is usually fitted with a washer
which must be removed.
 Attach the end of the hose 4 to
adapter 1.
 Use the hose holder.
 Use a screwdriver to tighten hose clip
3 up close to the nut.
 Fit non-return valve 5 to tumble dryer
drain hose 6.
Non-return valve 5 has to be fitted so
that the arrow points in the direction
of flow (i.e. towards the sink).
 Secure the non-return valve using
hose clips.