Miele TMV 840 WP Operating Instructions Manual page 22

Miele@home
This appliance / is communication
enabled and can be connected to the
Miele@home system via a communica‐
tion module  (optional accessory) and
a conversion kit where required.
The Miele@home system enables com‐
munication enabled appliances to send
information via the household wiring
network to a master appliance  such
as an oven with SuperVision function
about their operational status, as well
as information about the progress of
the programme.
Displaying information and control‐
ling appliances
– SuperVision master appliance 
The status of other signed on appli‐
ances can be shown in the display of
some communication enabled appli‐
ances.
– Mobile device 
A PC, Notebook, Tablet PC or a
Smartphone can be used within the
reception area of a household WLAN
 to display status information about
signed on appliances and carry out
certain functions.
– Household network 
The Miele@home system enables
smart living. The Miele@home Gate‐
way  allows other communication
enabled appliances to integrate into
the household bus system.
– In Germany communication enabled
appliances can be integrated into the
QIVICON Smart Home Platform in‐
stead of the Miele@home Gateway
(www.qivicon.de).
22
SmartStart
Smart grid enabled appliances can be
started automatically at a time when
electricity costs are favourable or when
a favourable supply of electricity is
available (e.g. from a solar power sys‐
tem).
Accessories required
– Communication module XKM3000Z
– Conversion kit for communication
system XKV (depending on house‐
hold appliance)
– Miele@home Gateway XGW3000
These accessories are supplied with
their own installation and operating in‐
structions.
Further information
Further information regarding
Miele@home is available on the internet
and in the instruction manuals of the
various Miele@home components.
Please note that the Miele@home and
SuperVision system is currently only
available in selected countries.