Section 3 - Configuration
PORT MAPPING
Port Mapping supports multiple ports to PVC and bridging groups. Each group will perform as an independent network. To support this feature, you
must create mapping groups with appropriate LAN and WAN interfaces using the Add button.
The Remove button will remove the grouping and add the ungrouped interfaces to the Default group. Only the default group has IP interface.
To access the REMOTE MANAGEMENT setting window, click on the Remote Management button under the ADVANCED tab.
PORT MAPPING SETTINGS
Check the Enable virtual ports on box to
enable the port mapping.
Click on the Add button to add port mapping
rule.
D-Link DSL-2741B User Manual
51