Dynamic Ip Address - D-Link DSL-G624T User Manual

Dynamic IP Address

A Dynamic IP Address connection configures the Router to automatically obtain its global IP address from a
DHCP server on the ISP's network. The service provider assigns a global IP address from a pool of
addresses available to the service provider. Typically the IP address assigned has a long lease time, so it will
likely be the same address each time the Router requests an IP address.
To configure a Dynamic IP Address connection, perform the steps listed below. Some of the settings do not
need to be changed the first time the device is set up, but can be changed later if you choose. See the table
below for a description of all the settings available in this window.
To configure a Dynamic IP Address connection for the WAN, follow these steps:
1. Choose the Dynamic IP Address option from the WAN Setting pull-down menu.
2. Under the ATM VC Setting at the top of the window should not be changed unless you have been
instructed to change them. However, if you are instructed to change the VPI or VCI values, type in
the values assigned for your account. Leave the PVC and Virtual Circuit setting at the default
(Pcv0 and Enabled) values for now. This can be used later if you are configuring multiple virtual
DSL-G624T Wireless ADSL Router User Guide
WAN Settings menu – Dynamic IP Address
30