Information You Will Need About Your Lan Or Computer - D-Link DSL-G624T User Manual

Information you will need about your DSL-G624T Wireless ADSL
Router:
Username
Password
LAN IP addresses for
the DSL-G624T
LAN Subnet Mask for
the DSL-G624T

Information you will need about your LAN or computer:

Ethernet NIC
DHCP Client status
It is recommended that your collect and record this information here, or in some other secure place, in case
you have to re-configure your ADSL connection in the future.
Once you have the above information, you are ready to setup and configure your DSL-G624T Wireless
ADSL Router.
DSL-G624T Wireless ADSL Router User Guide
This is the Username needed access the Router's
management interface. When you attempt to connect
to the device through a web browser you will be
prompted to enter this Username. The default
Username for the Router is "admin." The user cannot
change this.
This is the Password you will be prompted to enter
when you access the Router's management interface.
The default Password is "admin." The user may
change this.
This is the IP address you will enter into the Address
field of your web browser to access the Router's
configuration graphical user interface (GUI) using a
web browser. The default IP address is 192.168.1.1.
This may be changed to suit any IP address scheme
the user desires. This address will be the base IP
address used for DHCP service on the LAN when
DHCP is enabled.
This is the subnet mask used by the DSL-G624T, and
will be used throughout your LAN. The default subnet
mask is 255.255.255.0. This can be changed later.
If your computer has an Ethernet NIC, you can
connect the DSL-G624T to this Ethernet port using
an Ethernet cable. You can also use the Ethernet
ports on the DSL-G624T to connect to other
computer or Ethernet devices.
Your DSL-G624T Wireless ADSL Router is
configured, by default, to be a DHCP server. This
means that it can assign an IP address, subnet
mask, and a default gateway address to computers
on your LAN. The default range of IP addresses the
DSL-G624T will assign are from 192.168.1.2 to
192.168.1.254. Your computer (or computers)
needs to be configured to Obtain an IP address
automatically (that is, they need to be configured
as DHCP clients.)
viii
Record info here
Record info here