To Delete All The Values Stored In Memory - Omron HEM-7322 Instruction Manual

3. Using the Unit
To View the Average Value
1.
Press the
3 seconds.
Notes:
• If the previous reading was taken without setting the date and time, the average value is not calculated.
• If there are no measurements results stored in the memory, the screen to the right is
displayed.

To Delete All the Values Stored in Memory

When the memory symbol (
the Memory button. Then while holding it down,
press the START/STOP button simultaneously for
more than 3 seconds.
Note:
You cannot partially delete values stored in the memory.
button for more than
) appears, first press
EN
13