To Delete All Values Stored In The Memory - Omron HEM-670ITCAN Instruction Manual

USING THE MEMORY FUNCTION

TO DELETE ALL VALUES STORED IN THE MEMORY

You cannot partially delete measurement values stored in the memory.
All values will be deleted.
1. Press the START/STOP button
to turn the power off, then press the SET button.
Continue to press the SET button until the
Delete Data Screen displays.
2. Select YES or NO.
NOTE: The DELETE DATA SETTING
automatically defaults to ( ) NO after
deleting the measurement values stored
in the memory.
Press the ( ) button to change the Delete Data
Setting to YES.
Press the SET button.
ARE YOU SURE? displays on the screen.
50
All Memory
Erasure Screen
All Memory
Erasure YES Screen
Are You Sure
YES Screen