2110 Ambient light sensor and camera/LED cable assembly
For access, remove these FRUs in order:
•
"1170 Keyboard bezel assembly and LCD unit" on page 78
•
"2010 LCD bezel assembly" on page 82
• "2070 3D camera or camera/microphone combo card " on page 86
Removal steps of the ambient light sensor (for models with a 2D camera)
When installing: Ensure that the connector is attached firmly.
Removal steps of the ambient light sensor (for models with a 3D camera)
2
1
2
1
Chapter 9
3
3
.
Removing or replacing a FRU
91