Download Print this page

Installation (Vent Inside) - Belling MK2 User Manual

Stainless steel 100cm chimney hood

Advertisement

1 Installation (Vent outside):
Attention! Observe the warning in the instruction sheet concerning the
operation of the appliance when air is discharged from the room.
When the range hood and appliance supplied with energy other than
electricity are simultaneously in operation, the negative pressure in
the room must be not exceed 4 Pa (4×10
Drill 3 x 8mm holes to accommodate the bracket. Screw and tighten the
bracket onto the wall with the screws & screw plugs provided.
1.
Offer up the cooker hood and hang onto the wall bracket hook.
7
Installation
-5
Bar)

Advertisement

loading