Channel Scan; Keypad Lock - Oricom PMR1290 Operating Instructions Manual

Calling (Paging) Tone
You can use the CALL button to send a tone to other users
on the same channel. To activate this feature;
a. With the PMR in normal mode, press and release the

Channel Scan

Your radio can scan the 80 channels for any activity. This
allows to find other radios without having to change the
channel.
To activate this feature:
a. Press and old the MENU and UP button at the same time
b. Press the PTT button to stop scanning and talk on that
c. To stop scanning, press the MENU button and return to

Keypad Lock

With the buttons locked you can still transmit "TX", or call the
current channel, but you can not change the volume. To activate
this feature; In the standby mode, press and hold the MENU until
the icon appears on the LCD screen.
To unlock the Keypad
Press and hold again the MENU button until the
on the LCD screen.
CALL button. The unit will transmit a 2-second page
tone to the other unit/s set with the same channel within
transmitting range
and channel scanning will start immediately, with SC
displayed on the screen and the channel number cycling
through the channels. When a signal is detected, the unit
will pause on that channel, while receiving the signal and
for a further 3 seconds.
channel, press the UP or DOWN button to manually start
the scanning.
standby mode.
Operation
icon disappears
15