Related Manuals for Master audio MA206
Summary of Contents for Master audio MA206
- Page 1 MA206 / MAW115D User’s manual Pol.Ind.Norte-Perpinyà,25 08226 TERRASSA (Barcelona-SPAIN) info@master-audio.com www.master-audio.com Nov 2008...
- Page 2 D. This product has been exposed to rain; or E. The chassis is damaged. 9. Unplug this product during lightning storms or when unused for long periods of time. 10. Do not suspend the cabinet from the handles. MA206/MAW115.Version 1.3 Nov 08...
- Page 3 An assembly of individual sound sources arrayed with regular separation between the sources on a plane or curved continuous surface is equivalent to a single sound source having the same dimensions as the total assembly if the following conditions are fulfilled: MA206/MAW115.Version 1.3 Nov 08...
- Page 4 This flat wavefront is ideal for vertical configurations. Fig.3. High frequency waveguide MA206/MAW115.Version 1.3 Nov 08...
- Page 5 (Fraunhofer) can be calculated through the following formula ⎛ ⎞ − ⎜ ⎜ ⎟ ⎟ ⎝ ⎠ where = limit distance between near field and far field (in metres) H = height of the array (in metres) f= frequency (in kHz) MA206/MAW115.Version 1.3 Nov 08...
- Page 6 In the first zone (Fresnel), sound pressure loss is of 3 dB per doubling of distance, whereas in the second zone (Fraunhofer) the loss is 6 dB. In long throw and high SPL configurations it is very important to produce cylindrical waves. MA206/MAW115.Version 1.3 Nov 08...
- Page 7 MAW-115 in its active with DSP version (MAW-115/D). 2.1.Front design The MA-206 shape is "trapezoidal-flat". The "baffles" are flat-shaped and the cabinet has a trap angle of 2 x 5º. Fig.8. Dimensions of MA-206 MA206/MAW115.Version 1.3 Nov 08...
- Page 8 • Gain control for each way • Crossovers up to 24 dB/Oct • Limiters for each way The adjustments can be done through a rear screen placed on each MA-206/D or through PC with RJ45 connectors. MA206/MAW115.Version 1.3 Nov 08...
- Page 9 H) SIGNAL OUT : Signal output to feed 3 passive units of MA-206/P. Fig.9. Connections panel for MA-206/D 2.6. MA-206/P P=Passive version of MA-206 feed by a MA206/D. Transducers and waveguides are those explained in 2.2 and 2.3. 2.6.1. Rear connections Each unit of MA-206/P includes a Rear Panel with the following items: MA206/MAW115.Version 1.3...
- Page 10 (CNC) which allows us to ensure perfect and accurate assembly. The black finish, which uses totally ecological water-based acrylic resin paint, provides an excellent external protection We also include a 1.5mm black-painted steel grille with acoustically transparent foam on the front side. MA206/MAW115.Version 1.3 Nov 08...
- Page 11 Each unit of MAW-115/D includes a Rear Aluminium Panel with the following items: A) RJ45 INPUT : PC Signal Input B) RJ45 LINK : PC Link Signal C) INPUT SIGNAL : Balanced XLR input signal connector 1= Shield 2= Live 3= Return MA206/MAW115.Version 1.3 Nov 08...
- Page 12 This low distortion and unmatched quality are further and significantly improved by the double demodulating rings (DDR) embedded in the pole piece of the magnetic structure. These are designed to dramatically reduce the MA206/MAW115.Version 1.3 Nov 08...
- Page 13 (almost 90%) allows their location on the rear panel without the necessity of forced cooling. We eliminate any fan or any other auxiliary device which may fail because of extra mechanical work. The DSP control software allows: MA206/MAW115.Version 1.3 Nov 08...
- Page 14 1= Ground 2= Live 3= Return E) AC INPUT : Input PowerCon connector. F) AC STACKING OUTPUT : PowerCon Output connector to feed a secondary cabinet. G) LED OVERVOLTAGE Fig.14. Connections panel for MAW-215/D/2K MA206/MAW115.Version 1.3 Nov 08...
-
Page 15: System Connections
MA-206/P. For the DSP control via PC/Laptop simply connect the PC output to the RJ45 INPUT (Fig.9.(A)) of the first MA206/D unit and daisy chain the signal to the second of MA206/D unit through RJ45 LINK (Fig.9.(B)). MA206/MAW115.Version 1.3... - Page 16 The front structures are used to vertically join the cabinets; the back structures are used to vertically join the cabinets and to tilt them. Angles can be changed from 0º to 8º. To safely lock the guides, the lock pins supplied must be used. MA206/MAW115.Version 1.3 Nov 08...
- Page 17 It includes a centre and lateral bars to reinforce the whole structure. The centre bar has a series of holes that provide a pickup point for the steel chain slings or the hoists. The pickup point chosen will determine the tilt angle of the whole array system. MA206/MAW115.Version 1.3 Nov 08...
- Page 18 We recommend the use of a safety cable on the shackles' hole. (see Fig.23). You should coil the cable around the shackle to avoid any incident in case of unscrewed guides. Fig.21. Safety cable for shackle MA206/MAW115.Version 1.3 Nov 08...
- Page 19 When you are flying the first cabinet, follow the previous explanation but set the back guide between the back structures of the Bumper. Fig.22. MA-206 Flying with Bumper Fig.23. MA-206 Flying. Flat Line Array 0 º (Back Guide =0º) MA206/MAW115.Version 1.3 Nov 08...
-
Page 20: Overvoltage Protection
(230V +/- 10% ). When the Overvoltage LED lights (in RED) (Fig.9. LED OVERVOLTAGE (G), Fig.12. LED OVERVOLTAGE (G), Fig.14. LED OVERVOLTAGE (G)), the cabinet stops working (or works intermittently) until the correct voltage values are reached again. MA206/MAW115.Version 1.3 Nov 08... - Page 21 2x RJ45 for External PC Control MA206P 1x SPEAKON +1,-1 LOW / +2,-2 HIGH Material Birch plywood, Stainless Steel Flying Hardware, Black painted Steel Grille Finish Black (Acrylic resin, ecological water-based) Rigging Integrated flying hardware and handles MA206/MAW115.Version 1.3 Nov 08...
- Page 22 1x INPUT XLR Balanced 1x LINK XLR Balanced 2x RJ45 for External PC Control Material Birch plywood, Stainless Steel Flying Hardware, Black Painted Steel grille Finish Black (Acrylic resin, ecological water-based) Rigging Integrated flying hardware and handles MA206/MAW115.Version 1.3 Nov 08...
- Page 23 1x INPUT XLR Balanced 1x LINK XLR Balanced 2x RJ45 for External PC Control Material Birch plywood, Stainless Steel Flying Hardware, 2mm Black Painted steel grille Finish Black (Acrylic resin, ecological water-based) Rigging Integrated flying hardware and handles MA206/MAW115.Version 1.3 Nov 08...
-
Page 24: Troubleshooting
• Check if there is any light dimmer on the same AC circuit as the cabinet. Connect the sound system to a different phase than the lights. VERTICAL: 220V HORIZONTAL: 115V Fig.25. Fuse position (front view) Overvoltage LED (on RED) • Check that the input voltage is within the right values (230V +/- 10%) MA206/MAW115.Version 1.3 Nov 08... - Page 25 Amate Electroacústica,s.l. 10. MA206 FLYING TA-206 MA206 You need TA-206 Bumper TA-206 MA206 + MAW115 You need TA-206 Bumper TA-210HD MA206 + MAW215 You need TA-210HD Bumper FA-10/6 Frame Adaptor 4 x BL-8 Ball Lock Pins FA-10/6 MA206/MAW115.Version 1.3 Nov 08...
- Page 26 Amate Electroacústica,s.l. TA-210HD MA206 + MA210 You need TA-210HD Bumper FA-10/6 Frame Adaptor 4 x BL-8 Ball Lock Pins FA-10/6 11. MA206 STACKING MA206 + MAW115 FA-15/10 MA206 + MAW215 You need FA-15/6 Frame Adaptor 4 x BL-8 Ball Lock Pins for MA206/MAW115.Version 1.3...