Download Print this page

Master audio LN-26 Series User Manual

Hide thumbs Also See for LN-26 Series:

Advertisement

Available languages

Available languages

Quick Links

LN SERIES
LN-26 / LN-8
LN-10X / LN-12X
LN-15X / LN-215
LN-15BR / LN-18BR / LN-18SW
Pol.Ind.Norte-Perpinyà,25
08226 TERRASSA (Barcelona-SPAIN)
Copyright © 2009
info@master-audio.com
All rights reserved
www.master-audio.com
Nov 09
Manual usuario / User's manual

Advertisement

loading

Summary of Contents for Master audio LN-26 Series

  • Page 1 LN SERIES LN-26 / LN-8 LN-10X / LN-12X LN-15X / LN-215 LN-15BR / LN-18BR / LN-18SW Pol.Ind.Norte-Perpinyà,25 08226 TERRASSA (Barcelona-SPAIN) Copyright © 2009 info@master-audio.com All rights reserved www.master-audio.com Nov 09 Manual usuario / User’s manual...
  • Page 2 Master Audio ESPAÑOL 1. INTRODUCCIÓN 1.1. Generalidades Amate Electroacústica, s.l. le agradece la confianza depositada en nuestros productos de la Serie LN. Le sugerimos lea atentamente las indicaciones que a continuación exponemos, confiando en que le serán de gran utilidad para obtener sus mejores resultados.
  • Page 3 Master Audio LN-15X - Sistema de 2 vías Full Range - Altavoz de 15" de Neodimio y alto rendimiento - Motor de agudos con diafragma de Mylar de 1" ¾ - Difusor de dispersión asimétrica 50º a 100º(H) x 55º(V) - Filtro divisor pasivo diseñado con precisión para obtener los mejores resultados...
  • Page 4 Master Audio 2. CONEXIONES 2.1. Descripción conexionado Fig.1. Conexiones para LN-26 / LN-8 / LN-10X / LN-12X / LN-15X Fig.2. Conexiones para LN-215 / LN-15BR / LN-18BR / LN-18SW 1 - SPEAKON : Todos los modelos incorporan dos terminales Speakon y están preparados para su perfecta conexión en un sistema en paralelo.
  • Page 5 Master Audio Fig.3. Configuración Full range stereo 2.2.2. Configuración Full Range en Paralelo Conectar una primera caja desde la salida del amplificador a su entrada de Speakon, respetando siempre la polaridad positivo +1, negativo -1. A continuación, realizar un puente mediante manguera, desde esta primera caja a la segunda. Con esta configuración podrá...
  • Page 6 Master Audio correcta polaridad entre ambos sistemas. Proceder de igual manera para el otro canal. También es correcto, si la instalación lo requiere, efectuar la conexión a la inversa, es decir, del amplificador al satélite y luego al subwoofer. Fig.5. Configuración en pasivo con subwoofer 2.2.4.
  • Page 7: Montaje E Instalación

    Master Audio Fig.7. Configuración bi-amplificada con subwoofer (opción 2) ¡ATENCIÓN!!!!: Para efectuar un puente entre cajas, cada una de ellas dispone de dos conectores idénticos Speakon que hacen la función de Entrada / Salida indistintamente. Siempre deben utilizarse los terminales Pin +1/-1, despreciando los terminales +2/-2 que no están conectados internamente.
  • Page 8 Master Audio Si esto no es posible deberían situarse en un punto intermedio entre los canales Izquierdo y Derecho. 3.2. Uso con trípode Los modelos LN-10X, LN-12X y LN-15X incorporan en su parte inferior un vaso para trípode Standard de 35mm.
  • Page 9 Master Audio 3.5. Uso en aplicaciones de Directo (móvil) Para una aplicación móvil, para Directo o Discoteca, la ubicación clásica sería la de situar las unidades de graves (una ó dos por canal) a cada lado del escenario (sobre éste).
  • Page 10 Master Audio En una sonorización normalmente se intentará establecer un compromiso entre las zonas a cubrir. Interesará: *cobertura amplia para los oyentes más cercanos (short throw) *cobertura más estrecha para los oyentes más alejados (long throw) Los difusores con dispersión asimétrica varían su cobertura horizontal, "simulando"...
  • Page 11 Master Audio 3.6.3. Utilización como monitor de escenario Caso 1 Nos interesa mantener una cobertura máxima (100º) en el campo cercano del cantante y una cobertura más estrecha pero direccional (50º) a medida que el cantante se aleja. 100º Nearfield 50º...
  • Page 12 Master Audio Near Field Fig.17. Logotipo “Near Field” 3.7. Giro del logotipo Los logotipos de los modelos LN-26, LN-8, LN-10X, LN-12X y LN-15X pueden girarse. 3.8. Colocación LN-18SW Sus cuatro patas de goma pueden cambiarse de la parte inferior a la lateral en el caso de utilización según la posición B.
  • Page 13 Master Audio Fig.19. Soporte para LN-26 / LN-8 Colgado: 1- Sitúe el soporte cerca de la pared donde vaya a colgar la caja y marque la localización de los dos puntos de soporte (1), y del punto central para pasar el cable de conexión (2).
  • Page 14 Master Audio 3.9.2. Volado LN-10X, LN-12X Estos modelos incorporan varios puntos de suspensión M8. Su correcta combinación permite el volado de las cajas tanto en posición horizontal como en vertical. Fig.21. Puntos de volado Volado horizontal Puntos 1 y 2. Utilice el punto 3 para dar la inclinación necesaria.
  • Page 15 Master Audio Fig.22. Puntos de volado 3.9.4. Volado LN-215 Este modelo incorpora varios puntos de suspensión de M8 y sólo permite el volado vertical. Volado vertical Puntos 1. Utilice los punto 2 para dar la inclinación necesaria. Fig.23. Puntos de volado LN-215 LN Series.
  • Page 16 Master Audio 3.9.5. Volado LN-15BR / LN-18BR / LN-18SW Estos modelos no han sido diseñados para ser volados. 3.9.6. Soporte "U" modelo U-N10 (Opcional) Opcionalmente, puede adquirirse soporte en forma de "U" para el modelo LN-10X. El soporte debe ir siempre montado con sus correspondientes roscas y permite el colgado tanto en posición horizontal como en vertical.
  • Page 17: Especificaciones

    Master Audio 4. ESPECIFICACIONES 4.1. Especificaciones LN-8 Impedancia 16Ω Sensibilidad 1W/1m 94dB Respuesta en frecuencia (-10 dB) 68Hz-20kHz Capacidad de potencia R.M.S 120W Programa 240W Directividad nominal (-6dB) 90º cónico Componentes 1x8" woofer 1x 1” tweeter con diafragma de titanio...
  • Page 18 Master Audio Peso (neto) 8.3Kg Conectores 2 x Speakon (IN/LINK) Material Tablero abedul, Reja frontal de acero pintada epoxy negra con espuma acústicamente transparente Acabado Pintura negra de resinas acrílicas, ecológica a base de agua 4.3. Especificaciones LN-10X Impedancia 8Ω...
  • Page 19 Master Audio Componentes 1x12" woofer neodimio 1x motor con diafragma de titanio (bobina 1.5”) Recinto Altura 627mm Anchura 412 mm Profundidad 401 mm Peso (neto) 18.5Kg Conectores 2 x Speakon (IN/LINK) Material Tablero abedul, Reja frontal de acero pintada epoxy negra con espuma acústicamente transparente...
  • Page 20 Master Audio Capacidad de potencia R.M.S 1000W Programa 2000W Directividad nominal (-6dB) Horizontal 90º Vertical 50º Componentes 2x15" woofer neodimio 1x motor con diafragma de titanio (bobina 1.7”) Recinto Altura 1150mm Anchura 471 mm Profundidad 500 mm Peso (neto) 39Kg...
  • Page 21 Master Audio 4.8. Especificaciones LN-18BR Impedancia 4Ω Sensibilidad 1W/1m 100dB Respuesta en frecuencia (-10 dB) 35Hz-180Hz Capacidad de potencia R.M.S 800W Programa 1600W Directividad nominal (-6dB) omnidireccional Componentes 1x18" woofer neodimio Recinto Altura 550mm Anchura 740 mm Profundidad 670 mm...
  • Page 22 Master Audio 5. APÉNDICE. PÉRDIDA DE POTENCIA (EN %) Y FACTOR DE DAMPING, RELATIVA A LA LONGITUD DEL CABLE Y SU SECCIÓN Largo Sección Resistencia Pérdida de Potencia Pérdida cable (Ohms) 8Ohms 4Ohms 2Ohms Damping(*) 8Ohms 4 Ohms 0.75 0.042 0.53%...
  • Page 23 Master Audio ENGLISH 1. INTRODUCTION 1.1. General Amate Electroacústica, s.l. would like to thank you for your confidence in our LN Series. We suggest you to carefully read the following instructions in order to obtain the best results in performance.
  • Page 24 Master Audio LN-15X - Two Way Full Range Speaker System - 15" High Performance Neodymium Woofer - 1" ¾ Mylar diaphragm Driver - 50º to 100º(H) x 55º(V) asymmetrical dispersion horn - Accurate designed Crossover to achieve the best performance - Power Handling : 400 W r.m.s...
  • Page 25 Master Audio 2. CONNECTIONS 2.1. Connection description Fig.1. LN-26 / LN-8 / LN-10X / LN-12X / LN-15X connectors Fig.2. LN-215 / LN-15BR / LN-18BR / LN-18SW connectors 1 - SPEAKON : All models use two Speakon terminals and are duly prepared for a perfect connection in a parallel system.
  • Page 26 Master Audio Fig.3. Full range stereo configuration 2.2.2. Full Range Parallel configuration Connect the Speakon input of the first cabinet to the amplifier's output, always respecting the polarity positive +1, negative -1. Then, make a bridge from the first cabinet to the second one. This configuration allows us to connect up to four cabinets to the same amplifier.
  • Page 27 Master Audio Do the same with the other channel. It is also correct, if the installation requires so, to make the connection in the opposite way, that is, from the amplifier to the satellite and then to the subwoofer. Fig.5. Passive with subwoofer configuration 2.2.4.
  • Page 28: Mounting And Placement

    Master Audio WARNING!!!!: In order to allow a bridge connection between cabinets, each one of them has been provided with two Speakon connectors that allow the Input / Output function indistinctly. Terminal Pins +1/-1 must be always used, disregarding the +2/-2 which are not internally connected.
  • Page 29 Master Audio Fig.9. Full range cabinet with subwoofer 3.4. Stage monitor use The LN-10X, LN-12X and LN-15X models have trapezoidal shape so, they can be used as floor monitors without extra accessories. 41º Fig.10. Stage monitor use 3.5. Live applications (mobile) For a mobile application, whether it is an outdoor or indoor installation, the common location is to place the bass units (one or two per channel) on each side of the stage.
  • Page 30 Master Audio To obtain a clear and free-distortion reproduction, it is advisable to place the mid-high units on top of the low units keeping between them an approximate height of two meters. If such height cannot be achieved nor maintained, it is advisable to use the classical tripod for each mid-high cabinet and leave the low units on the floor.
  • Page 31 Master Audio 50º 50º LONG THROW 100º 100º SHORT THROW Fig.13. Vertical position 3.6.2. Horizontal-Positioned Cabinets (Hung and aiming to the audience) We need wide coverage (100º) for the closest listeners and narrow coverage for the distant audience. . 50º...
  • Page 32 Master Audio Case 2 We need wider coverage (100º) when performers move away from the cabinet (long stages) than when they are close to it (50º). 50º 50º Nearfield 100º SHORT THROW 100º LONG THROW Fig.16. Stage monitor use (case 2) WARNING: The horns have the "Nearfield"...
  • Page 33 Master Audio 3.9. Flying Only experienced people should fly speaker cabinets. Extreme care should be taken to assure the load bearing capabilities of the structures where the cabinets will be placed. Hanging hardware (as chains, eyebolt, Lock Pins...) should be regularly inspected and replaced if in doubt.
  • Page 34 Master Audio Fig.20. Some of the Standard accessories for LN-26 / LN8 3.9.2. LN-10X, LN-12X Flying These models provide several M8 flying points. Its correct use will permit the flying in horizontal or vertical position. Fig.21. Flying points Horizontal Flying Points 1 and 2.
  • Page 35 Master Audio Fig.22. Flying points Vertical Flying Points 1 and 2 or 3 and 4. Use point 5 or 7 to get the desired inclination. Horizontal Flying Points 1 and 6. Use points 5 and 7 to get the desired inclination.
  • Page 36 Master Audio 3.9.5. LN-15BR / LN-18BR / LN-18SW Flying These models are not prepared for flying. 3.9.6. Bracket U-N10 (Optional) The LN-10X can optionally incorporate a "U" bracket which allows the cabinet to be mounted on a wall or ceiling. The bracket may be mounted with either nails or screws, horizontally or vertically.
  • Page 37: Technical Features

    Master Audio 4. TECHNICAL FEATURES 4.1. LN-8 technical features Impedance 16Ω Sensitivity 1W/1m 94dB Frequency response (-10 dB) 68Hz-20kHz Power handling R.M.S 120W Program 240W Nominal directivity (-6dB) 90º conical Components 1x8" woofer 1x 1” tweeter with titanium diaphragm Enclosure...
  • Page 38 Master Audio 4.3. LN-10X technical features Impedance 8Ω Sensitivity 1W/1m 97dB Frequency response (-10 dB) 53Hz-20kHz Power handling R.M.S 250W Program 500W Nominal directivity (-6dB) Horizontal 50º to 100º (rotatable horn) Vertical 55º Components 1x10" neodymium woofer 1x driver with titanium diaphragm (1.5” voice coil)
  • Page 39 Master Audio Enclosure Height 627mm Width 412 mm Depth 401mm Net weight 18.5Kg Connections 2 x Speakon (IN/LINK) Material Birch plywood, Steel front grille with foam Finish Black painted 4.5. LN-15X technical features Impedance 8Ω Sensitivity 1W/1m 100dB Frequency response (-10 dB)
  • Page 40 Master Audio Nominal directivity (-6dB) Horizontal 90º Vertical 50º Components 2x15" neodymium woofer 1x driver with titanium diaphragm (1.7” voice coil) Enclosure Height 1150mm Width 471 mm Depth 500mm Net weight 39Kg Connections 2 x Speakon (IN/LINK) Material Birch plywood, Steel front grille with foam...
  • Page 41 Master Audio Power handling R.M.S 800W Program 1600W Nominal directivity (-6dB) Horizontal omnidirectional Vertical omnidirectional Components 1x18" neodymium woofer Enclosure Height 550mm Width 740 mm Depth 670mm Net weight 43Kg Connections 2 x Speakon (IN/LINK) Material Birch plywood, Steel front grilles with foam...
  • Page 42 Master Audio 5. APPENDIX POWER LOSSES(%) AND DAMPING FACTOR, RELATED TO WIRE LENGTH AND SECTION Wire Section Resistance Power losses Damping losses(*) length (Ohms) 8Ohms 4Ohms 2Ohms 8 Ohms 4 Ohms 0.75 0.042 0.53% 1.05% 2.10% 1.50 0.025 0.31% 0.63% 1.25%...