Table of Contents
Advertisement
6. TROUBLE SHOOTING
6-1. TROUBLE DIAGNOSIS
Caution for the Repair and Replacement
Please follow below instruction for the trouble diagnosis and parts replacement.
1) To reduce component damage due to static electricity, always observe anti static procedures.
2) Since AC220~240V is applied to the triac T1 and T2 on P.C.B, the electric shock may occur by
touching and be careful of the HIGH VOLTAGE Hazzard.
3) Do not replace the Main PCB ASSY until you have reviewed all the technical information from the
following pages.
6-1
Hide quick links:
Advertisement
Table of Contents
