5. ASSEMBLY AND DISASSEMBLY
5-1. TOOLS FOR DISASSEMBLY AND ASSEMBLY
NO.
Box driver
1
Open End wrench 10, 13,19mm
2
3
Vice pliers
4
Other(Driver, Nipper, Long nose)
5
JIG for the Tub
TOOL
10mm
13mm
19mm
Heater (1)
Motor (1), Balance (5), 2 holes of each left and right of the
shock absorber 1 Pulley hole
Replaceable for the box driver.
Since the bolt runs idle when the box driver is used, use the
box driver 17mm.
Tool to protect the idle and abrasion of the bolt for the
box driver.
General tools for the after service.
1 (Disassemble and Assemble)
5-1