Advertisement
INSTALLATION
ENVIRONMENT
Leave some space
Space at least 15cm between the washer
and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak
surface, noise or vibration may be occured.
(Allowable is 2 )
Never install the washer near water.
Do not place the washer in steamy rooms or
where the washer is directly exposed to rain.
Moisture may destroy the electrical insulation
and cause an electrical shock hazard.
Avoid direct sunlight or heating devices.
As plastic and electrical components are
affected by direct heat, never place the
washer near heaters, boilers,etc.
Do not place under direct sunlight.
Install the drain hose about
70~80cm above the ground
for pump model.
CLEANING THE MACHINE
CLENING THE LINT FILTER
If the dregs are filled up in the lint filter after
finishing the wash, push down and pull it
out as shown in figure.
Remove the collected lint and rinse the filter net.
1
2
DRAIN FILTER
In case of incomplete drain,disassemble
the drain filter with screw driver(+), and
remove lints from the filter as shown
in the filter as shown in the figure.
CONNECTING THE DRAIN HOSE
1. Before connecting the drain hose, remove the
cover (a) from the drain hole.
2. After pressing the joint ring (b), insert the drain
hose(c) to drain direction.
(a)
(C)
(C)
(b)
(b)
(In case of pump drained washer)
MOUNTING THE LEGS
Lay down the washer with its back facing downward.
Insert four legs into the leg mounting sections of the
base corners of the main body.
Claw
Insert the claw of the leg with the
square hole of the leg
mounting section, and
2
1
push the leg in the arrow
direction as shown in the
figure until it clicks.
Bottom face of main body
LEG
A
OVERFLOW FILTER
Pull the upper side of the overflow filter
with two fingers into the hole 'A'
in the direction of arrow as
shown in the figure.
CLEANING THE WASH TUB
First,fill water in the wash tub to 'L' level, then drain
water from the wash tub simultaneously with
operating wash cycle for 1~2 minutes.
Close the wash tub lid.
CLEANING THE WASHER BODY
Wipe off strains on the cabinet and operation panel
with soft cloth.Do not use benzene, thinners, cleanser,
or wax, nor scrub the washer with a brush.
Painted surfaces or piastic parts wii be damaged.
5
WASHING TIME
KINDS OF CLOTHING
Extremely solid heavy fabric
Linen,cotton,etc.
Ordinary clothes
(underwear,etc)
Slightly solied synthetic
fiber
100%wool,mixed wool knitting,
thin synthetic fiber with tags
indicating hand washing
Square hole
WHEN YOU LOAD THE LAUNDRY INTO
THE SPIN BASKET.
Press the laundry evenly and put the safety
cover into the spin basket drum as shown in
the figure.
TROUBLE
The washer
Check that the power cord is
does not work.
connected to a power outlet well.
Power stoppage?
Clothes will
not move freely.
Is the laundry overloaded?
Incomplete
Are the laundry arranged evenly?
spinning
LAUNDRY GUIDE
SPIN DRY TIME
TIME
TYPE OF LAUNDRY
WASHING
WASHING TIME
SELECTION
1min.
Thin(synthetic fiber)
1~2min.
10 to15minutes
3~5min.
NORMAL
5min.
8 to10minutes
DETERGENT
7minutes
AMOUNT OF
DETERGENT
2 to 5minutes
30g
SOFT
40g
2 to 5minutes
50g
The amount of detergent is average.
Follow the instruction detergent printed
on the package for amount of detergent.
Choose the amount of detergent
depending on the fabric type.
MAINTENANCE
TO PICK OUT THE CLOTHING WHICH HAS
FALLEN BETWEEN THE BASKET AND TUB.
For safty,pull the power supply plug out of the socket.
1.Disassemble a screw from the spin dryer hatch.
2.The spin dryer hatch is fixed to the brim by the concave and convex
parts at two places.
Expand the concave and
convex parts, and pull up
the spin dryer hatch to remove it.
3. Remove the clothing
4. Close the spin dryer hatch.
Push in hatch firmly until
the catch at the front is
engaged securely.
TROUBLE SHOOTING
CHECK POINT
TROUBLE
Is the filter clogged
Incomplete
with lint?
draining
Is the spin dryer lid closed
completely?
The spin dryer
Are laundry(socks,etc.) falling
basket will not
out of the spin dryer basket and
run.
clinging to the axle?
6
wool
cotton
thick(cotton)
WATER
LEVEL
Low
(30 )
Middle(40 )
High
(50 )
CHECK POINT
See "Cleaning the
machine" on page 5.
See To pick out... on page 6.
Advertisement
