8. Tools for Disassembly and Assembly
NO.
TOOL
c
Box driver
Double-ended
spanner
Vice pliers
Other(Driver, Nipper, Long nose) General tools for the after service.
JIG for the Tub
10mm
Heater (1)
13mm
Motor (1), Balance (5)
17mm
2 holes on each left and right of the shock absorber
19mm
1 Pulley hole
Replaceable for the box driver.
10, 13
Since the bolt runs idle when the box driver is used, use the box
17,19mm
driver 17mm.
Tool to protect the idle and abrasion of the bolt for the box driver.
1 (Disassemble and Assemble)
DD