Operating Your Appliance - Beko CCB 6254 S User Manual

3

Operating your appliance

After ten minutes the motor switches off and the
LED of key F remains switched on with a fixed light
until the motor starts up again at the first speed
after fifty minutes and keys F and C start to flash
again for ten minutes and so on.
By pressing any key for the exclusion of the hood
light the hood will return immediately to its normal
functioning (e.g. if key D is pressed the "clean
air" function is deactivated and the motor moves
to the 2nd speed straight away. By pressing key B
the function is deactivated).
(*) The "AUTOMATIC STOP TIMER" delays
stopping of the hood, which will continue function-
ing for 15 minutes at the operating speed set at
the time this function is activated.
Anti-grease/active charcoal filters
saturation:
When the A key flashes with a 2 second fre-
•
quency the antigrease filters must be washed.
When the A key flashes with a 0.5 second
•
frequency the active carbon filters must be re-
placed or washed depending on the type of filter.
Once the clean filter has been put back one must
reset the electronic memory by pressing the A key
for approximately 5 seconds until it stops flash-
ing.
Commands mechanical (Fig.10) the
key symbols are explained below:
A = LIGHT
B = OFF
C = SPEED I
D = SPEED II
E = SPEED III
G = MOTOR WORKING indicator.
14 / 15 EN
Commands slider (fig.11) the key
symbols are explained below:
A = Light switch
A1 = Off key
A2 = On key
B = Speed control
B1 = Off key
B2 = FIRST SPEED key
B3 = SECOND SPEED key
B4 = THIRD SPEED key.
THE MANUFACTURER DECLINES ALL RE-
SPONSIBILITY FOR EVENTUAL DAMAGES
CAUSED BY BREACHING THE ABOVE WARN-
INGS.
Cooker Hood / User Manual