Oil Change Procedure - Polaris Power P1000i Operator's Manual

MAINTENANCE
Engine Oil

Oil Change Procedure

Oil may be hot. Do not allow hot oil to come into contact with skin, as
serious burns may result.
Note: Drain the oil while the engine is warm to assure rapid and complete
draining.
1. Start the engine and allow it to run for a few minutes. Stop the
engine.
2. Position engine switch and fuel cap
vent lever to OFF.
3. Open the service door. See page 46.
4. Place a drain pan beneath the generator for used oil.
5. Remove the oil filler cap /
dipstick (A), tip the generator
toward the oil filler neck, and
drain the oil into a drain pan.
Note: Improper disposal of engine oil
can be harmful to the
environment and is unlawful.
Properly dispose of used oil.
6. Drain the used oil into a
sealed container and take it to
a recycling center. Do not
discard the oil into a rubbish
bin, dump it on the ground,
or pour it down the drain.
50
OFF
A
ON