Replacement Parts; Problems Affecting Emissions - Polaris Power P1000i Operator's Manual

Polaris power p1000i/ p2000i generator
Hide thumbs Also See for Power P1000i:
Table of Contents

Advertisement

OPERATION
Emission Control System Information

Problems Affecting Emissions

If aware of any of the following, have the engine inspected and repaired
by an authorized POLARIS supplier:
• Hard starting or stalling after starting
• Rough idle
• Shut down or backfire after applying an electrical load
• Afterburning (backfiring)
• Black exhaust smoke or high fuel consumption

Replacement Parts

The emission control system on the engine was designed, built, and
certified to conform to applicable emission regulations. We recommend
the use of POLARIS Genuine parts whenever maintenance is
performed. These original design replacement parts are manufactured to
the same standards as the original parts. The use of replacement parts
that are not of the original design and quality may impair the
effectiveness of the emission control system.
Aftermarket part manufacturers assume the responsibility that the part
will not adversely affect emission performance. The manufacturer or re-
builder of the part must certify that use of the part will not result in a
failure of the engine to comply with emission regulations.
42

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power p2000i

Table of Contents