Network - Ask Proxima C500 Series Manual

Expand

Network

Function : PC controls projector via LAN.
Preparation:
1. Equipments: PC, projector, cables
2. Connection procedures:
Connect the projector to routers or switches of the LAN by direct or cross cable. If it fails to
connect PC and projector by parallel cable, please switch to cross cable as suggested.
3. After the computer is booted and the projector is plugged in, indicator lights of LAN interface
on will flash continuously.
Operation procedures:
1 Turn on the projector.
2 Obtain network address. DHCP set is displayed as On and obtain network address
automatically.( If familiar with network, you can set DHCP as Off and obtain network
address manually.)
3 Enter network settings menu.
(1) Press MENU button on remote control to
display screen menu. Press  button to
select Expand, then press OK button.
(2) Press  button to select Network, and
then press OK button to enter the newtork
menu.
(3) When DHCP is set On, IP address, Subnet,
Gateway and DNS will be abtained
automatically, press OK at "Set" to confrim
the parameters.
When DHCP is set Off, press OK button to
enter IP address, then press button to enter
Subnet, Gateway and DNS respectivelt,
press OK at "Set" to confirm the parameters.
50
Downloaded From projector-manual.com ASK Manuals
Display
Network setting
Network information
Color adjust
MAC address:
Setting IP address:
Network setting
Expand
Memory
Viewer
Info.
----
ENTER
LAN
Network setting
DHCP On
IP address
Subnet
Gateway
DNS
Set
Move Next
ENTER
LAN
Network setting
DHCP Off
IP address
192
Subnet
255
Gateway
192
DNS
192
Set
Move Next
ENTER
Network
00:08:B3:CF:17:1F
192.168.1.100
Select Back
Cancel
Back
168 1 100
255 255 0
168 1 1
168 1 1
Cancel
Back