Factory Default - Ask Proxima C500 Series Manual

Remote control
This switching function prevents remote control
interference when operating several projectors
or video equipment at the same time.
The projector is assigned 10 different remote
control codes (Code 0-9), which are default
initial code (Code 0) and another 9 codes (code
1-9).
Code set on the projector and remote control
should be the same. For example, when using
code 7 to operate the projector, remote control
code also must be switched to Code 7.
Change the projector's code: Select "Remote
control" in advanced menu.
Change the remote control code: Press the OK
button and a number key (0-9) on the remote
control for more than 5 seconds to switch the
codes. When the light strat flashing, it means
code is setting ok.

Factory default

This function returns all setting values except
for the User logo, PIN code lock, Logo PIN
code lock, Lamp counter and Filter counter to
the factory default settings.
Downloaded From projector-manual.com ASK Manuals
Light
Display
Code 0

Code 1
Color adjust
Code 2
Code 3
Setting
Code 4
Expand
Code 5
Code 6
Memory
Viewer
Code 7
Code 8
Info.
Code 9
Move
Note:
● If the code set on the projector and remote control
is different, it will not execute any operation. In
this case, switch the remote control code to the
same code as that of the projector.
● If the battery is removed for a long period of time
from the remote control, the remote control code
will be reset.
Return to factory default?
Yes
Move
Expand
Remote control
Select Back
ENTER
No
Select Back
51