Basic operation
Input select
Direct Operation
Press Computer 1, Computer 2, HDMI,
Component, Video, S-video, Network, Memory
Viewer or USB Display on remote control as
input source.
Menu operation
1 Press INPUT button on side control to display
the input select menu.
2 Press button to select Computer, HDMI,
Component, Video, S-video, Network,
Memory Viewer or USB Display, then press
OK button.
When input source is from
Network
network connected to LAN
terminal with LAN cable, please
select "Network".
When input source is from
Memory Viewer
device connected to USB-A
terminal, please select "Memory
Viewer".
When input source is from
USB Display
device connected to USB-B
terminal, please select "USB
Display".
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, the input signal will
be searched automatically.
- Memory Viewer function, please refer to page 55~56.
- USB Display function, please refer to page 57~58.
30
Downloaded From projector-manual.com ASK Manuals
Side control
INPUT button
Remote control
Input select menu
Computer 1
Computer 2
HDMI
Component
Video
S-video
Network
Memory Viewer
USB Display
NETWORK
button
USB DISPLAY
button
MEMORY VIEWER
button