Expand; Language; Auto Setup - Ask Proxima C500 Series Manual

The projector has Expand menu that allows you to set the other various expand functions
described as follows.
1 Press MENU button on remote control to display screen menu. Press  button to select "Expand",
then press OK button.
2 Press  button to select the item you want to set, press OK button.
3 Press  button to adjust the item, then press OK button.

Language

Press button to select the language for
screen menu.
The language used in screen menu is available
in English, German, French, Italian, Spanish,
Polish, Swedish, Dutch, Portugese, Japanese,
traditional Chinese, Korean, Russian, Arabic,
Turkish, Finnish, Norwegian, Danish, Indonesian,
Czech, Vietnamese, Thai and Farsi.

Auto setup

Press AUTO button on the remote control to
execute "Input search", "Auto PC adj." and
"Auto keystone" functions.
Input search
Allows you to automatically detect input
signals. It stops when a signal is found. Press
 button to select an option below:
Off ........ Disabled.
On ........ Enabled. This function is used to
detect input signals automatically
and stops when finding a signal.
Auto PC adj.
On ........ Press the AUTO button on the
remote control or side control to
enable Auto PC adj. function
automatically.
Off ........ Cancel Auto PC adj. function.
Auto keystone
Off ........ Disabled.
Auto ..... When detecting the projector is
tilted, correct the vertical keystone
in real time.
Manual ........ When pressing KEYSTONE
Downloaded From projector-manual.com ASK Manuals
button on the side control or
remote control, perform a
vertical keystone.
Expand menu
Language
Display
Auto setup
Keystone
Color adjust
Logo
Security
Setting
Power management

Expand

Filter counter
Test pattern
Memory
Viewer
Network
Remote control
Info.
Factory default
Move
Auto setup
Display
Input search
Auto PC adj.
Color adjust
Auto keystone
Setting
Expand
Memory
Viewer
Info.
Adjust
Note:

- "Input search", "Auto PC Adj." and "Auto Keystone"
cannot be set to "Off" at the same time. At least
one of them is set to "On".
- Sometimes the auto keystone maybe correct
image imperfectly, manual keystone is required.
- The Auto keystone function cannot work when
"Display" → "Project way" is set to "Ceiling/
Front" or "Ceiling/Rear".
Expand
...
Next Back
ENTER
Auto setup
Off
On
Off
Select Back
ENTER
43