Suggested Tool Requirements; Preparation Of Sleeve; Preparation Of The Front Grille - LG 230/208V Service Manual

3.2 SUGGESTED TOOL REQUIREMENTS

SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL

3.2.1 PREPARATION OF SLEEVE

SLEEVE HARDWARE
NUMBER NAME OF PARTS
SLEEVE LOWER
SLEEVE UPPER
SCREW
OUTDOOR GRILLE
DRAIN KIT
ASSEMBLE THE WALL SLEEVE
• Raise the sleeve side panels to upright position as shown on
the right.
• Place sleeve upper on top of side panels.
• Fasten the four screws as shown on the right.
• Assemble drain kit.
• Fasten this assembly to the each side of the wall sleeve as
shown on the right.
• Assemble the outdoor grille and fasten the 4 screws as
shown on the right.

3.2.2 PREPARATION OF THE FRONT GRILLE

Carefully remove shipping tape, if there is any, from the front
grille.
1 1
Q'TY
1
1
4
1
1
—18—
1 2
1 4
Shipping tape