3.2 SUGGESTED TOOL REQUIREMENTS
SCREWDRIVER (FLAT and PHILLIPS), RULER, KNIFE, HAMMER, PENCIL, LEVEL
3.2.1 PREPARATION OF SLEEVE
SLEEVE HARDWARE
NUMBER
NAME OF PARTS
LOVER SLEEVE
UPPER SLEEVE
SCREW
OUTDOOR GRILLE
DRAIN KIT
ASSEMBLE THE WALL SLEEVE
• Raise the sleeve side panels to upright position as shown on
the right.
• Place sleeve upper on top of side panels.
• Fasten the four screws as shown on the right.
• Assemble the drain kit.
• Fasten this assembly to the each side of the wall sleeve as
shown on the right.
• Assemble the outdoor grille and fasten the 4 screws as
shown on the right.
3.2.2 PREPARATION OF THE FRONT GRILLE
Carefully remove shipping tape from the front grille.
1 1
Q'TY
1
1
4
1
1
—20—
1 2
1 4
Shipping Tape