Oplayback - Technics RS-B655 Operating Instructions Manual

Playback
1
Switch the amplifier ON, and select its "tape"
input source.
+
Press if the tape was recorded by the
type-B Dolby NR system. (The "B"
Dolby noise-reduction indicator will
then illuminate.)
Press if the tape was recorded by the
type'C Dolby NR system. (The "C"
Dolby noise-reduction
indicator will
then illuminate.)
2
@t-*t
oFF the timer switch.
Q F"*";l
v, S-witctr ON the power "standby O /on"
switch.
4 F*
the eject button, and then insert the
cassette tape.
(The part of the cassette where the tape is
exposed should face downward.)
5
@r*""
the playback button.
(The playback indicator will illuminate, and playback will
begin.)
I To temporarilY stoP PlaYback
tp-auE] Press the pause button.
(The playback indicator will begin flashing.)
To resume playback, press the playback button.
I To stop playback
lstopl Press the stop button.
(The playback indicator will switch OFF.)
Note:
Do not press the eiect button while the tape is moving; doing so
might cause a malfunction or damage the tape.
-tE-
- noise reduction -
B - D o l b y N R - C
+l#-
\ l t
-E-
/ l \
- noise reduction -
B - D o l b y N R - C
-r
oTo switch OFF the Dolby noise-reduction system, press the
button corresponding to the Dolby noise-reduction indicator that
is illuminated. (The indicator will then switch OFF.)
- 6 -