Raid1 - Auto Rebuilding - D-Link DNS-321 User Manual

Section 3 - Configuration
When a hard Drive fails or becomes corrupted RAID 1 provides a the feature to enable the Auto Rebuild configuration. This configuration
will take the information from one of the existing hard drives and rebuild the new hard drive with the same information to get the RAID 1
configuration completed.
Information: To view the hard drive status you can got to STATUS >
SYSTEM INFO and monitor the Sync Time Remaining
field. If it displays Completed, the RAID 1 configuration
is functioning normal.
Degraded: If it displays Degraded, then one of the hard drives
have either failed or is starting to fail. This means that
the problematic hard drive needs to be replaced.
Step 1: After the new hard drive is inserted into the DNS-321
and if Auto Rebuild was disabled from the beginning,
go to TOOLS > RAID to start the Auto Rebuilding
process. If Auto Rebuild was enabled from the
beginning, the DNS-321 will start this Rebuilding
process automatically.
You can now click the Manually Rebuild Now button
to initiate the Auto Rebuilding process.
D-Link DNS-321 User Manual

RAID1 - Auto Rebuilding

63