Ftp Server - D-Link DNS-321 User Manual

Section 3 - Configuration
The DNS-321 is equipped with a built in FTP Server. The server is
easy to configure and allows users access to important data whether
they are on the local network or at a remote location. The FTP server
can be configured to allow user access to specific directories, and will
allow up to 10 users to access the DNS-321 simultaneously.
Determines whether the FTP server rule will apply to
Category:
an individual user or a group.
Select the group or user the FTP server rule will
User:
apply to.
Browse and select the folder or directory you are
Folder:
granting FTP access to. Select root to grant access
to all volumes.
Permission: Set the user or group permission to Read Only or Read/Write.
Max User:
Set the maximum amount of users that can connect
to the FTP server.
Idle Time:
Set the amount of time a user can remain idle before
being disconnected.
Port: Set the FTP port. Default is 21.
Flow Control:
Allows you to limit the amount of bandwidth available for each user.
Client Language:
Most standard FTP clients like Windows
Support has been added for non standard FTP clients that are capable of supporting these character sets.
Click Apply to save your rule.
Apply:
Please Note:
In order to use FXP (File Exchange Protocol) for server-to-server data transfer, please make sure to change the port from 21
to some other port as listed in the Port section of the web UI. Also, please make sure to open the corresponding port on your
router and forward that port from your router to the DNS-321.
D-Link DNS-321 User Manual

FTP Server

® FTP, only support Western European code page when transferring files.
26