D-Link DNS-321 User Manual page 65

Section 3 - Configuration
Auto-Rebuild is a feature that will allow the DNS-321
Step 5:
to initiate the Rebuilding phase automatically. The
Rebuilding phase will occur when one or more hard drives
fail and is replaced by a new one. WARNING - This feature
will automatically format the newly added drive. If this
feature is NOT required, click disable. Click Next.
This step allows you to enter the desired capacity of
Step 6:
the RAID 1 Volume that will be created. The remaining
space will become a JBOD (Linear) Volume. Click Next
to continue.
RAID configuration will initiate and formatting of the hard
drives will commence.
After the RAID 1 configuration, you'll be prompted to
click the Restart button. The RAID 1 configuration is
complete.
D-Link DNS-321 User Manual
62