Gree GWHD(18)NK3FO Service Manual page 52

Step s
10. Remove axial flow blade
Remove the nut on the blade and then remove the
axial flow blade.
11. Remove motor and motor support
Remove the 4 tapping screws fixing the motor and
disconnect the leading wire insert of the motor.
Then remove the motor. Remove the 2 tapping
screws fixing the motor support and chassis, and
then lift the motor support to remove it.
12. Remove electric box assy
Remove the screws fixing the electric box assy and
the middle isolation sheet, and then lift the electric
box assy to remove it.
P rocedure
axial flow blade
motor
motor support
electric box assy