Alarm Recording - WebGate NVS04S Installation & User Manual

8.2.5.16. Alarm Recording

This menu is to set Alarm Recording condition. After setup Recording condition, "Alarm recording"
menu from "Recording" must be "On" to setup Alarm recording in NVS. Also, before setup Alarm
recording, "Alarm Source" must be set.
- Alarm Source
- Recording Speed
- Pre Alarm (sec)
- Post Alarm (sec)
< ote>
1. Please set 'Alarm Source' with connecting IP camera in each channel before setting of 'Alarm
Record'. (MD, Sensor)
: Through Alarm Source, Sensors and MD, Text input is selectable.
: Available to set 1 ~ 30ips.
: It can set max. 5 second.
: It can set max. 60 seconds.
46