Connecting In Public Mode - WebGate NVS04S Installation & User Manual

5.3. Connecting in Public mode

(1) Connect Lan port to local network using Ethernet cable.
(2) Execute Control Center Configuration Tool program at PC and type the IP Address of IP camera
connected and ID, Password to connect it with NVS04S. (Refer the manual at "8.1.3.2 IP Camera" to
select channel of IP camera)
< ote>
1. One single NVS04S is available to use Public and Private mode using each port.
2. IP camera changes its mode from normal to recording mode when VS04S is connected with IP
Camera v2.1.x.x Recording mode is limited to 2stream and the user can not change stream.
When the user wants to change stream at recording mode, the user needs to change saving
configuration at the recording channel of VS04S where the relevant IP camera is mapped.
3. Version below IP Camera v2.1.x.x do not support recording mode and VS04S is not able to be
connected to it.
4. To change the mode from recording mode to normal mode, separate VS04S from IP camera
and reboot.
14