WebGate NVS04S Installation & User Manual page 13

< ote>
1. The user can connect Private port and IP Camera directly.
2. IF the user configure the value of "1. Cam ID" at IP Camera's OSD menu to the relevant channel
and it works.
3. When VS04S is connected to IP Camera v2.1.x.x, IP Camera changes its mode to recording
mode. Recording mode is limited to 2stream and the user can not change stream. When the user
wants to change stream at recording mode, the user needs to change saving configuration at the
recording channel of VS04S where the relevant IP camera is mapped.
4. Version below IP Camera v2.1.x.x do not support recording mode and VS04S is not able to be
connected to it.
5. To change the mode from recording mode to normal mode, separate VS04S from IP camera
and reboot.
13