Ntp Setup; Connectivity; When Using Ethernet - WebGate NVS04S Installation & User Manual

< ote>
Z
If Time zone is changed, add time as much as the Time zone to current time.
Ex) If current time is +01:00(Amsterdam) 01:25 and if change this time to +09:00(Seoul) , it will be
+09:00(Seoul) 10:25.
8.2.4.2. TP Setup
NTP (Network Time Protocol) is the function to sync the time with device which can be standard on the
network.
- Mode : Select Server/Client/Both. At Server mode, NVS04S supply the time by itself and gets
the time from Time Server at Client mode. It works as Server & Client in both modes
at the same time.
- Interval : When NTP mode is Client, select a period of time to get. (1/3/6/12/24Hour.)
- IP Type : When it gets Time data from NTP server opened in Internet, select Public IP. When it
gets the time from NTP server indicated by user, select Local IP. (Public IP/Local IP)
- Local IP : When IP Type is Local IP, input NTP Server IP.

8.2.5. Connectivity

8.2.5.1.

When using Ethernet

Select "Use DHCP" If user uses dynamic IP address. Input IP address, subnet mask, gateway and DNS
server if user uses static IP address.
32