Hitachi RAC-25NX2 Service Manual page 17

Hide thumbs Also See for RAC-25NX2:
Table of Contents

Advertisement

Available languages

Available languages

HOW TO SET THE SLEEP TIMER
Set the current time at first if it is not set before (see the pages for setting the current time).
Press the
(SLEEP) button and the display changes as shown below.
Mode
Sleep Timer
Sleep Timer: The device will continue working for the desired number
of hours and then turn off.
SLEEP
Point the signal window of the remote controller toward the indoor unit,
and press the SLEEP button.
The timer information will be displayed on the remote controller.
The TIMER lamp lights with a beep from the indoor unit. When the
sleep timer has been set, the display indicates the turn-off time.
Sleep
timer
1
Set the ON-timer.
2
Press the
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the
button.
The
(RESERVED) sign goes out with a beep and the
NOTE
If you set the sleep timer when the off-time or on/off
timer has been set earlier, the sleep timer becomes
effective instead of the off - or on/off-timer set earlier.
Indication
1 hour
2 hours
3 hours
7 hours
Sleep timer off
Example: If you set 3 hours sleep time
AM
at 11:38 p.m., the turn-off time is
2:38 a.m..
The device will be turned off by the sleep timer
Start
and turned on by on-timer.
(SLEEP) button and set the sleep timer.
For heating:
AM
In this case, the device will turn off in 2
hours (at 1:38 a.m.) and will turn on
early so that the present temperature
will be almost reached at 6:00 a.m. next
morning.
AM
(CANCEL)
(TIMER) lamp turns off on the indoor unit.
– 14 –
ADJUSTING THE AIR DEFLECTORS
1
Adjustment of the conditioned air in the upward
and downward directions.
The horizontal air deflector is automatically set to
the proper angle suitable for each operation. The
deflector can be swung up and down continuously
and also set to the desired angle using the "
(AUTO SWING)" button.
• If the "
(AUTO SWING)" button is
pressed once, the horizontal air deflector
swings up and down. If the button is
pressed again, the deflector stops in its
current position.
• Use the horizontal air deflector within
the adjusting range shown in the right
figure.
• When the "
(AUTO SWING)" button is
pressed while the operation is stopped,
the horizontal air deflector moves and
stops at the position where the air outlet
closes.
• When the auto swing operation is
performed, if the horizontal air deflector
is moved manually, the swinging range
may drift. However, it will return to the
original operation range after a short
time.
2
Adjustment of the conditioned air to the left and
right.
Hold the vertical air deflector as shown in the figure
and adjust the conditioned air to the left and right.
CAUTION
When operating the unit in cooling operation with the air deflector facing down and moving automatically
for a long period of time, water will be condensed on the air deflector and drips down occasionally. This
will wet your furniture.
When
Vertical
heating,
about 50°
about
30°
When cooling,
dehumidifying
about 40°
Vertical air deflector
– 15 –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Raf-25nx2

Table of Contents