Store A Number In A Speed Dial Location; Store A Pause Or Flash In A Speed Dial Entry; Store A Call History Number In A Speed Dial Location - AT&T CL2909 User Manual

Speed dial
Speed dial

Store a number in a speed dial location

There are 14 speed dial locations (seven upper and
seven lower). To access an upper location, press a
speed dial key. To access a lower location, press
LOWER, then press a speed dial key.
1. Access the desired speed dial location, as
described above.
2. Enter the telephone number you want to
store (up to 24 digits). Press CALL LIST
backspace and make corrections.
-OR-
Press REDIAL to store the last number dialed
(up to 24 digits).
3. Press PROG to save the entry in the location you
pressed in step 1. The screen displays STORED.
NOTES:
• If the speed dial location you pressed in step 1
is occupied, delete the number before storing a
new number.
• If the number you entered is over 24 digits, the
screen displays ONLY 24 ALLOWED.

Store a pause or flash in a speed dial entry

Press CALL LIST
dialing sequence (P displays). Press FLASH to store
a flash in the dialing sequence (F displays).
Store a call history number in a speed dial
location
1. Press CALL LIST
through the call history.
Press PROG, then press a speed dial key.
2.
-OR-
Press PROG, then press LOWER and a
speed dial key to store the number. The screen
displays STORED.
NOTE: If the speed dial location you pressed
in step 2 is occupied, the new telephone number
replaces the old one. Take caution not to replace
entries you do not wish to delete from the speed
dial locations.
20
twice to store a pause in the twice to store a pause in the
or CALL LIST
to
to scroll to scroll