Table of Contents
Advertisement
Quick Links
Belt-drive Turntable
For your own safety, please read this user manual carefully
All persons involved in the installation, operation and maintenance of this device have to:
- be qualified
- follow the instructions of this manual
1. INTRODUCTION
Thank you for having chosen an OMNITRONIC BD-1520/1550 turntable. If you follow the instructions given
in this manual, we can assure you that you will enjoy this device for many years.
Unpack your BD-1520/1550.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.
1.1 Features
Belt-drive DJ-turntable
With professional belt-drive • Delivery includes high-quality pick-up system qualified for back-cueing •
Adjustable +/- 10 % speed control • Large Start/Stop-button • Instant start due to a powerful motor; short stop
time via belt • Remote start possible via ¼"-connection on the rear panel • Strobe lamp for exact speed
adjustment • Target lamp • Delivery includes removable dustcover • Adjustable anti-skating • Shock-absor-
bing feet
2. SAFETY INSTRUCTIONS
Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
OPERATING INSTRUCTIONS
BD-1520/1550
before you initial start-up.
CAUTION!
10
®
Advertisement
Table of Contents
Related Manuals for Omnitronic BD-1520
Summary of Contents for Omnitronic BD-1520
-
Page 1: Operating Instructions
- follow the instructions of this manual 1. INTRODUCTION Thank you for having chosen an OMNITRONIC BD-1520/1550 turntable. If you follow the instructions given in this manual, we can assure you that you will enjoy this device for many years. -
Page 2: Operating Determinations
Important: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. Always plug in the power plug least. Make sure that the power-switch is set to OFF position before you connect the device to the mains. -
Page 3: General Description
CAUTION! The RCA-connection plugs must never be connected with the Phono-inputs of your mixer! Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth. Please use the original packaging if the device is to be transported. Please consider that unauthorized modifications on the device are forbidden due to safety reasons! Never remove the serial barcode from the device as this would make the guarantee void. - Page 4 Débrancher avant de remplacer le fusible. Utiliser un fusible de rechange de même type. OMNITRONIC SHOWEQUIPMENT GmbH, GERMANY Connect the RCA-cables (white=left channel, red=right channel) with the PHONO IN-sockets of your amplifier or mixer. Connect the ground lead with the ground terminal of your amplifier or mixer.
-
Page 5: Cleaning And Maintenance
8. OPERATION • Select the speed required for the record you want to play. • Put the record on the platter. Use the puck if needed (e.g. for singles). • Remove the the stylus cover and release the tonearm. • Press the START/STOP-button and the turntable begins to rotate. •... -
Page 6: Technical Specifications
There are no servicable parts inside the device. Maintenance and service operations are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts. If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only in order to avoid hazards.
Need help?
Do you have a question about the BD-1520 and is the answer not in the manual?
Questions and answers