Lexmark Pro700 Series User Manual page 51

1
Insert a USB Bluetooth adapter into the USB port.
Bluetooth Dongle Connected appears on the display.
Notes:
•
A Bluetooth adapter is not included with the printer.
• Your printer automatically switches to Bluetooth mode when you insert a USB Bluetooth adapter.
2
Make sure the printer is set up to receive Bluetooth connections. For more information, see "Setting up a connection
between your printer and a Bluetooth-enabled device" on page 48.
3
Set up the Bluetooth device to print to the printer. For more information, see the documentation for your Bluetooth
device.
4
See the documentation for your Bluetooth device to begin printing.
Note: If the Bluetooth Security Level on the printer is set to High, you must enter a pass key.
Warning—Potential Damage: Do not touch any cables, any network adapter, any
connector, the USB Bluetooth adapter, or the printer in the areas shown while
actively printing, reading, or writing from a Bluetooth-enabled device. A loss of
data can occur.
Printing
51