Understanding Control Test Results - EPS Bio Technology EasyPlus mini User Manual

Understanding Control Test Results

The label on your test strip bottle shows the acceptable ranges for the Control Solution. The result you get
should be inside this range. Make sure you compare the result to the correct level of control.
Level
Normal Control
High Control
When the control result is inside the range on the test strip bottle, your test strips and your meter is working
properly.
If your control result is not inside the acceptable range (printed on your test strip bottle), here are some things
you can do to solve the problem:
Note:
Control Solution values will be included in the memory and averages. Refer to the section
"Viewing & Deleting Test Results" to delete the control solution values before averaging your test
results.
Acceptable Control Ranges
96~144 mg/dL
280~420 mg/dL
Target Values
120 mg/dL
350 mg/dL
22